Split tube furnace up to 1300°C - FST/FZS

Изтегляне на брошура Изтегляне на техническа информация


FST 13/70/500Custom designed 3-zone FZS 13/100/4500 with 4500 mm heated length, automated opening and APM work tubeCustom designed 6-zone FZS 13/100/3000 with 3000 mm heated length and counter flow flanges. For simultaneous heat treatment of four carbon fibres under inert gas atmosphere. Supplied with separate control cabinet.

The FST, single zone, and FZS, 3-zone, split tube furnaces can be used either vertically or horizontally and have a maximum operating temperature of 1300 °C.

The split heating module allows either easy positioning of the work tube or positioning around reactors which have fixed end flanges. The split design may also allow faster cooling of the sample. Cooling channels are engineered into the housing to aid with convection cooling of the outer case. A handle is attached to the upper half of the split tube furnace with two quick-release clamps to safely unlock and lock the furnace.

The two furnace halves are ceramic fibre modules with high quality APM wire heating elements mounted in the insulation, held in position by a ceramic holding ridge. A safety switch protects the operator by switching off the heating elements once the furnace is opened.

Customized versions and a comprehensive range of tube furnace accessories complete the available options.

Примери за приложение

синтез, синтероване, смекчаване, сублимация, annealing, calcination, CIM, coating, CVD, MIM, soldering, test fuel cells, thermocouple calibration, дегазиране, заварка, изследвания на катализатори, мини растения, пиролиза, стареене, сушене, уякчаване

Стандартни функции

  • 1300 °C maximum operating temperature
  • Carbolite Gero 3216CC controller, with single ramp to setpoint & process timer
  • 3-zone models fitted with 1 x 3216CC and 2 x 3216CC end zone controllers, with retransmission of setpoint
  • Accepts work tubes with outer diameter up to 150 mm
  • Single-zone heated lengths of 200, 500 or 1000 mm
  • 3-zone heated lengths of 500 or 1000 mm
  • Split design allows work tubes or reactors with fixed flanges to be accommodate
  • For horizontal or vertical use
  • Exceptionally long life time and temperature stability
  • High grade type S thermocouple
  • Low thermal mass ceramic fibre insulation
  • High quality 5 mm APM wire heating elements
  • Supplied with separate control box with 3 m cable, plug and socket

Опции (посочете ги при подаване на поръчка)

  • Предлага се гама от усъвършенствани цифрови контролери, многостепенни програматори и уреди за запис на данни. Те могат да бъдат оборудвани с RS232, RS485 или Етернет комуникации
  • Температурна защита против прегряване (препоръчва се за предпазване на ценно съдържание и за работа без надзор)
  • Wide choice of tube diameters and materials is available
  • For split tube furnaces, robustly shaped ceramic half tubes are available to protect the heating elements and for sample holding
  • 'L'stand for vertical and/or horizontal use
  • Изолационни тапи и екран за защита срещу излъчвания за предотвратяване загубата на топлина и за по-равномерно разпределление на температурата
  • Modified atmosphere and vacuum packages are available
  • Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available
  • Larger tube diameters
  • Longer heated lengths
  • Automated opening mechanism
  • Flanges for inert gas counter flow
  • Oxygen sensor for inert gas packages

Съдържанието подлежи на промени или поправки